Compared with the rivetless joint process, spot welding process has many disadvantages.

Welding, for example, burns layers; Toxic fumes are produced when galvanized sheet metal is welded; Welding aluminum profiles also doesn't work well. In contrast, the rivetless connection process does not burn the surface of the coating when connecting the coating material; When crimping galvanized materials, the rivetless bonding process also does not release harmful heat and smoke; And the effect of connecting aluminum profiles and composite sheet metal is also very good. Therefore, the rivetless joining process is more cost-effective than the welding process.

Introduction of rivetless connecting mechanism

For it, it seems that a lot of people will want it to have a better life with you I use, but the idea seems to pressure riveting machine is not able to have the final say, but a big part of my hands or you can decide, actually very simple a truth, for life it itself has a regulation, but it will be under your taking it all messed up, It can even cause more damage, so it is important to pay attention to the essentials of use to some extent. After the use of the press stop, in order to better ensure that it will not happen any chaos in which, the most should be cut off the power supply, stagnation in such an environment can better protect the riveting machine. In order to better implement all the responsibilities to everyone, in other words, is to better protect the riveting machine, to do a good job of use records, so as to strengthen the presence of responsibility.

After the completion of the whole work without rivets, in addition to doing the above work, as a controller should do the most is the final work of processing, such as residual debris in the work of the riveting machine, should also be complex to clean up.

In fact, this process can reduce the better use of the riveting machine in more cases, more maintenance or to exist.

What industries are the main applications of rivet free connection?

Without rivet connection technology of new type connection method, without rivet connection technology using pressure welding machine and special connection plate mold, through a strong instantaneous high pressure processing, material of cold extrusion deformation according to the panel itself, forming a certain tensile resistance and shear strength of stress concentration inside inlaid dot, can be different material thickness of two layer or multilayer board connected. Rivetless connection technology has no requirements on the surface of the plate, and the original coating and paint layer on the surface of the plate at the connection point are not damaged. High degree of automation of connection process, single point or multi-point connection at the same time, and can be no damage connection strength detection and automatic monitoring of the whole process, high production efficiency. Rivetless connection technology is mainly used in automobile industry, home appliance industry, electronics industry, hardware industry and other stamping processing plate connection industry.