After the gas-liquid booster cylinder system has been used for a long time, there will be a lot of dust inside and outside. At this time, it is necessary to clean the gas supercharging system. Then what should be paid attention to when cleaning the gas supercharging system?

1. Kerosene, alcohol or other corrosive liquids can not be used to prevent the corrosion of hydraulic components, fuel tanks and other components, affecting the normal use of hydraulic devices.

2. When cleaning the gas supercharging system, the operation of the hydraulic pump and the heating of the cleaning medium should be carried out at the same time. Because, when the temperature of cleaning oil is 50 degrees Celsius to 80 degrees Celsius, the rubber residue in the system is easily removed.

3. Intermittent operation of the hydraulic pump can improve the cleaning effect.

4. We should install filters in the loop of the cleaning oil circuit of the gas boosting system, so that most of the impurities in the system can be filtered out.

5, cleaning hydraulic pump time is generally between forty-eight hours to sixty hours, which is determined by the complexity of the system and the degree of pollution and other factors.

6, at the end of the cleaning, do not immediately stop the operation of the hydraulic pump, should make it continue to operate until the temperature of the hydraulic pump to return to normal, so as to prevent external moisture to rust the internal device.

7. After cleaning the gas pressurization system, the cleaning oil in the loop should be removed in time.

In order to prolong the service life of the gas supercharging system, we must pay attention to these matters mentioned above when cleaning the gas supercharging system in the future.

Gas-liquid booster pump in the use of four safety warnings

So to speak, the real-time safety protection do face to face on how to comprehensive, always there will be a hidden risk factor under water, every time when you confident using gas-liquid booster pump, will give you a duel, tend to be in this way, will you off guard, gas-liquid booster pump more sometimes will bring harm to oneself.

Often this time is in the test of a person's ability to do things, and the state of mind in the face of crisis, but often for the more damaging force of the gas-liquid booster pump, it should do enough work in safety.

Therefore, for often dealing with gas-liquid booster pump manufacturers, at least before the use of training is very important, but also a kind of good medicine to eliminate hidden dangers, this is one of the least trip, but also the beginning of the starting point.

1, the first and foremost one can not be changed premise, is that the environmental choice that constantly allows change, this should be used in the environment of the gas-liquid booster pump.

2. In the process of inspection, if any signs of damage are found in each pipe, it is necessary to find maintenance personnel in time without dragging.

3, in the selection of lubricating oil, or the choice of medium booster pump, should also consider the impact of environmental protection, as well as physical injury.

4, the last thing that the booster pump repeatedly emphasizes is that the gas-liquid booster pump in the whole operation process, do not arbitrarily touch with the body.