● It is easy to detect the connection strength without damage.

● The material is squeezed at the joint point and thus strengthened. There will be no mechanical stress concentration and no joint deformation.

● Perfect connection even in very narrow flange edge or small mounting space.

● The bearing capacity of the dot connection has nothing to do with the loading direction, that is, whether it is subjected to shear load or tensile load, its bearing capacity is the same.

● Compared with spot welding cost can save 30 ~ 60%.

● No punching, no waste, no iron filings.

● Static connection strength of single point connection is 70% of spot welding. Dynamic fatigue joint strength is much higher than spot welding.

● Multi-point simultaneous connection, high efficiency.

● No damage to the coating or coating of the connection point, no need for post-sequence painting and plating. Textile, plastic, foil, film, paper, sealing materials, insulation materials, etc.) note:

● Only the gas-liquid booster cylinder stamping equipment has the function of "soft" in place to meet the use of rivetless die connection.

● For different products, there are different equipment to adapt.

● According to different plate, punching pressure, demoulding strength is different, design different tooling, to meet your different requirements.

The advantages of rivetless connecting machine are also very prominent:

1. The cost is greatly reduced. First of all, a rivet connection pattern in the bus duct plate deformation, directly without any rivets or bolts, parts, benefits directly is the lower procurement costs and management costs, and second, extremely low power consumption without rivet machine, due to the use of is, in fact, cylinder, only need to provide the gas source and 60 watts around low control power, the power consumption of a rivet connection can work, Therefore, the use cost of the rivetless connection machine is also very low. Finally, the purchase cost of the rivetless connecting machine is also very low, and the general price is about 30,000 to 40,000 yuan, which has obvious advantages over the self-punching riveting machine.

2, high efficiency. The rivetless connecting machine also does not need to Pierce the nail, inspection and other processes, theoretically its efficiency compared with self-punching riveting and too, at the same time, the rivetless riveting machine can be installed on the NUMERICAL control system to achieve digital automatic production.